The net/http package improperly accepts a bare LF as a line terminator in chunked data chunk-size lines. This can permit request smuggling if a net/http server is used in conjunction with a server that incorrectly accepts a bare LF as part of a chunk-ext.

Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When reading a config value, Git strips any trailing carriage return and line feed (CRLF). When writing a config entry, values with a trailing CR are not quoted, causing the CR to be lost when the config is later read. When initializing a submodule, if the submodule path contains a trailing CR, the altered path is read resulting in the submodule being checked out to an incorrect location. If a symlink exists that points the altered path to the submodule hooks directory, and the submodule contains an executable post-checkout hook, the script may be unintentionally executed after checkout. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.

Breaking git with a carriage return and cloning RCE

There is a MEDIUM severity vulnerability affecting CPython.

The 
email module didn’t properly quote newlines for email headers when 
serializing an email message allowing for header injection when an email
 is serialized.

When using a TarFile.errorlevel = 0 and extracting with a filter the documented behavior is that any filtered members would be skipped and not extracted. However the actual behavior of TarFile.errorlevel = 0 in affected versions is that the member would still be extracted and not skipped.

Malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0. 
Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code. This results in a modified liblzma library that can be used by any software linked against this library, intercepting and modifying the data interaction with this library.

Scans liblzma from xu-utils for backdoor (CVE-2024-3094)

The repository consists of a checker file that confirms if your xz version and xz-utils package is vulnerable to CVE-2024-3094.

Ansible playbook for patching CVE-2024-3094

Scan for files containing the signature from the `xz` backdoor (CVE-2024-3094)

XZ Backdoor Extract(Test on Ubuntu 23.10)

Threat intelligence report analyzing the xz-utils backdoor vulnerability (CVE-2024-3094)

Shell scripts to identify and fix installations of xz-utils affected by the CVE-2024-3094 vulnerability. Versions 5.6.0 and 5.6.1 of xz-utils are known to be vulnerable, and this script aids in detecting them and optionally downgrading to a stable, un-compromised version (5.4.6) or upgrading to latest version.  Added Ansible Playbook

K8S and Docker Vulnerability Check for CVE-2024-3094

Presentazione per il corsi di sicurezza Informatica sulla vulnerabilità CVE-2024-3094

A script to detect if xz is vulnerable - CVE-2024-3094

Quick and dirty PoC for checking whether a vulnerable version of xz-utils is installed (CVE-2024-3094)

XZ Utils CVE-2024-3094 POC for Kubernetes

Verify if your installed version of xz-utils is vulnerable to CVE-2024-3094 backdoor

Ansible playbooks designed to check and remediate CVE-2024-3094 (XZ Backdoor)

apocalypxze: xz backdoor (2024) AKA CVE-2024-3094 related links

Checker for CVE-2024-3094 where malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0. Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code.

The CVE-2024-3094 Checker is a Bash tool for identifying if Linux systems are at risk from the CVE-2024-3094 flaw in XZ/LZMA utilities. It checks XZ versions, SSHD's LZMA linkage, and scans for specific byte patterns, delivering results in a concise table format. 

An Ansible Role that installs the xz backdoor (CVE-2024-3094) on a Debian host and optionally installs the xzbot tool.

CVE-2024-3094 실습 환경 구축 및 보고

Dockerfile and Kubernetes manifests for reproduce CVE-2024-3094

History of commits related to the xz backdoor Discovered On March 29, 2024: CVE-2024-3094.

XZ-Utils工具库恶意后门植入漏洞(CVE-2024-3094)

This repository contains a Bash script and a one-liner command to verify if a system is running a vulnerable version of the "xz" utility, as specified by CVE-2024-3094.

Script en bash para revisar si tienes la vulnerabilidad CVE-2024-3094.

A XZ backdoor vulnerability explained in details

Basic POC to test CVE-2024-3094 vulnerability inside K8s cluster

CVE-2024-3094 - Checker (fix for arch etc)

It was determined that malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0. #    It was determined that only certain operating systems and operating system versions were affected by this vulnerability.

GNU IFUNC is the real culprit behind CVE-2024-3094

Verify that your XZ Utils version is not vulnerable to CVE-2024-3094

A tutorial on how to detect the CVE 2024-3094

Security analysis project: Real-world CVE breakdown

Collection of Detection, Fix, and exploit for CVE-2024-3094 

An ssh honeypot with the XZ backdoor. CVE-2024-3094

This is a container environment running CVE-2024-3094 sshd backdoor instance, working with https://github.com/amlweems/xzbot project. IT IS NOT Docker, just implemented by chroot.

La siguiente regla YARA ayuda a detectar la presencia del backdoor en la librería liblzma comprometida en sistemas que utilizan las versiones 5.6.0 y 5.6.1 de la herramienta de compresión XZ.

notes, honeypot, and exploit demo for the xz backdoor (CVE-2024-3094)

Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.

The PAM module pam_cap.so of libcap configuration supports group names starting with “@”, during actual parsing, configurations not starting with “@” are incorrectly recognized as group names. This may result in nonintended users being granted an inherited capability set, potentially leading to security risks. Attackers can exploit this vulnerability to achieve local privilege escalation on systems where /etc/security/capability.conf is used to configure user inherited privileges by constructing specific usernames.

An integer overflow can be triggered in SQLite’s `concat_ws()` function. The resulting, truncated integer is then used to allocate a buffer. When SQLite then writes the resulting string to the buffer, it uses the original, untruncated size and thus a wild Heap Buffer overflow of size ~4GB can be triggered. This can result in arbitrary code execution.

The email module of Python through 3.11.3 incorrectly parses e-mail addresses that contain a special character. The wrong portion of an RFC2822 header is identified as the value of the addr-spec. In some applications, an attacker can bypass a protection mechanism in which application access is granted only after verifying receipt of e-mail to a specific domain (e.g., only @company.example.com addresses may be used for signup). This occurs in email/_parseaddr.py in recent versions of Python.

GNU Tar through 1.35 allows file overwrite via directory traversal in crafted TAR archives, with a certain two-step process. First, the victim must extract an archive that contains a ../ symlink to a critical directory. Second, the victim must extract an archive that contains a critical file, specified via a relative pathname that begins with the symlink name and ends with that critical file's name. Here, the extraction follows the symlink and overwrites the critical file. This bypasses the protection mechanism of "Member name contains '..'" that would occur for a single TAR archive that attempted to specify the critical file via a ../ approach. For example, the first archive can contain "x -> ../../../../../home/victim/.ssh" and the second archive can contain x/authorized_keys. This can affect server applications that automatically extract any number of user-supplied TAR archives, and were relying on the blocking of traversal. This can also affect software installation processes in which "tar xf" is run more than once (e.g., when installing a package can automatically install two dependencies that are set up as untrusted tarballs instead of official packages). NOTE: the official GNU Tar manual has an otherwise-empty directory for each "tar xf" in its Security Rules of Thumb; however, third-party advice leads users to run "tar xf" more than once into the same directory.

Allows arbitrary filesystem writes outside the extraction directory during extraction with filter="data".


You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile  extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter  for more information.

Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected.

Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links.

There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.

It was discovered that dpkg-deb does not properly sanitize directory permissions when extracting a control member into a temporary directory, which is
documented as being a safe operation even on untrusted data. This may result in leaving temporary files behind on cleanup. Given automated and repeated execution of dpkg-deb commands on
adversarial .deb packages or with well compressible files, placed
inside a directory with permissions not allowing removal by a non-root
user, this can end up in a DoS scenario due to causing disk quota
exhaustion or disk full conditions.

Due to the usage of a variable time instruction in the assembly implementation of an internal function, a small number of bits of secret scalars are leaked on the ppc64le architecture. Due to the way this function is used, we do not believe this leakage is enough to allow recovery of the private key when P-256 is used in any well known protocols.

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

Gitk is a Tcl/Tk based Git history browser. Starting with 2.41.0, a Git repository can be crafted in such a way that with some social engineering a user who has cloned the repository can be tricked into running any script (e.g., Bourne shell, Perl, Python, ...) supplied by the attacker by invoking gitk filename, where filename has a particular structure. The script is run with the privileges of the user. This vulnerability is fixed in 2.43.7, 2.44.4, 2.45.4, 2.46.4, 2.47.3, 2.48.2, 2.49.1, and 2.50.

CPAN.pm before 2.35 does not verify TLS certificates when downloading distributions over HTTPS.

A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.

Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations

Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.

The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.

While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

There is an illegal address access in the function postprocess_termcap() in parse_entry.c in ncurses 6.0 that will lead to a remote denial of service attack.

When asked to use a `.netrc` file for credentials **and** to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.

This flaw only manifests itself if the netrc file has a `default` entry that
omits both login and password. A rare circumstance.

During an address list folding when a separating comma ends up on a folded line and that line is to be unicode-encoded then the separator itself is also unicode-encoded. Expected behavior is that the separating comma remains a plan comma. This can result in the address header being misinterpreted by some mail servers.

A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.

The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.

This project generates DNS zonefiles with custom NSEC3 parameters to reproduce and evaluate the attacks in CVE-2023-50868.

Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Issue summary: Use of -addreject option with the openssl x509 application adds
a trusted use instead of a rejected use for a certificate.

Impact summary: If a user intends to make a trusted certificate rejected for
a particular use it will be instead marked as trusted for that use.

A copy & paste error during minor refactoring of the code introduced this
issue in the OpenSSL 3.5 version. If, for example, a trusted CA certificate
should be trusted only for the purpose of authenticating TLS servers but not
for CMS signature verification and the CMS signature verification is intended
to be marked as rejected with the -addreject option, the resulting CA
certificate will be trusted for CMS signature verification purpose instead.

Only users which use the trusted certificate format who use the openssl x509
command line application to add rejected uses are affected by this issue.
The issues affecting only the command line application are considered to
be Low severity.

The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue.

OpenSSL 3.4, 3.3, 3.2, 3.1, 3.0, 1.1.1 and 1.0.2 are also not affected by this
issue.

There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.

Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL
to crash leading to a potential Denial of Service attack

Impact summary: Applications loading files in the PKCS12 format from untrusted
sources might terminate abruptly.

A file in PKCS12 format can contain certificates and keys and may come from an
untrusted source. The PKCS12 specification allows certain fields to be NULL, but
OpenSSL does not correctly check for this case. This can lead to a NULL pointer
dereference that results in OpenSSL crashing. If an application processes PKCS12
files from an untrusted source using the OpenSSL APIs then that application will
be vulnerable to this issue.

OpenSSL APIs that are vulnerable to this are: PKCS12_parse(),
PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()
and PKCS12_newpass().

We have also fixed a similar issue in SMIME_write_PKCS7(). However since this
function is related to writing data we do not consider it security significant.

The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions

Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service

This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.

This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.

The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.

There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsing of maliciously crafted tar archives. 

This vulnerability can be mitigated by including the following patch after importing the “tarfile” module:  https://gist.github.com/sethmlarson/1716ac5b82b73dbcbf23ad2eff8b33e1

In pkgconf through 1.9.3, variable duplication can cause unbounded string expansion due to incorrect checks in libpkgconf/tuple.c:pkgconf_tuple_parse. For example, a .pc file containing a few hundred bytes can expand to one billion bytes.

The urllib.parse.urlsplit() and urlparse() functions improperly validated bracketed hosts (`[]`), allowing hosts that weren't IPv6 or IPvFuture. This behavior was not conformant to RFC 3986 and potentially enabled SSRF if a URL is processed by more than one URL parser.

Perl threads have a working directory race condition where file operations may target unintended paths.

If a directory handle is open at thread creation, the process-wide current working directory is temporarily changed in order to clone that handle for the new thread, which is visible from any third (or more) thread already running. 

This may lead to unintended operations such as loading code or accessing files from unexpected locations, which a local attacker may be able to exploit.

The bug was introduced in commit 11a11ecf4bea72b17d250cfb43c897be1341861e and released in Perl version 5.13.6

Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. The wincred credential helper uses a static buffer (target) as a unique key for storing and comparing against internal storage. This credential helper does not properly bounds check the available space remaining in the buffer before appending to it with wcsncat(), leading to potential buffer overflows. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.

Issue summary: A timing side-channel which could potentially allow recovering
the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations
could allow recovering the private key by an attacker. However, measuring
the timing would require either local access to the signing application or
a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In particular
the NIST P-521 curve is affected. To be able to measure this leak, the attacker
process must either be located in the same physical computer or must
have a very fast network connection with low latency. For that reason
the severity of this vulnerability is Low.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When cloning a repository Git knows to optionally fetch a bundle advertised by the remote server, which allows the server-side to offload parts of the clone to a CDN. The Git client does not perform sufficient validation of the advertised bundles, which allows the remote side to perform protocol injection. This protocol injection can cause the client to write the fetched bundle to a location controlled by the adversary. The fetched content is fully controlled by the server, which can in the worst case lead to arbitrary code execution. The use of bundle URIs is not enabled by default and can be controlled by the bundle.heuristic config option. Some cases of the vulnerability require that the adversary is in control of where a repository will be cloned to. This either requires social engineering or a recursive clone with submodules. These cases can thus be avoided by disabling recursive clones. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.

A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs.

Lax permissions set by the Apache Portable Runtime library on Unix platforms would allow local users read access to named shared memory segments, potentially revealing sensitive application data. 

This issue does not affect non-Unix platforms, or builds with APR_USE_SHMEM_SHMGET=1 (apr.h)

Users are recommended to upgrade to APR version 1.7.5, which fixes this issue.

There exists a vulnerability in SQLite versions before 3.50.2 where the number of aggregate terms could exceed the number of columns available. This could lead to a memory corruption issue. We recommend upgrading to version 3.50.2 or above.

There is a MEDIUM severity vulnerability affecting CPython.





Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives.

The Python standard library functions `urllib.parse.urlsplit` and `urlparse` accepted domain names that included square brackets which isn't valid according to RFC 3986. Square brackets are only meant to be used as delimiters for specifying IPv6 and IPvFuture hosts in URLs. This could result in differential parsing across the Python URL parser and other specification-compliant URL parsers.

When curl is asked to use HSTS, the expiry time for a subdomain might
overwrite a parent domain's cache entry, making it end sooner or later than
otherwise intended.

This affects curl using applications that enable HSTS and use URLs with the
insecure `HTTP://` scheme and perform transfers with hosts like
`x.example.com` as well as `example.com` where the first host is a subdomain
of the second host.

(The HSTS cache either needs to have been populated manually or there needs to
have been previous HTTPS accesses done as the cache needs to have entries for
the domains involved to trigger this problem.)

When `x.example.com` responds with `Strict-Transport-Security:` headers, this
bug can make the subdomain's expiry timeout *bleed over* and get set for the
parent domain `example.com` in curl's HSTS cache.

The result of a triggered bug is that HTTP accesses to `example.com` get
converted to HTTPS for a different period of time than what was asked for by
the origin server. If `example.com` for example stops supporting HTTPS at its
expiry time, curl might then fail to access `http://example.com` until the
(wrongly set) timeout expires. This bug can also expire the parent's entry
*earlier*, thus making curl inadvertently switch back to insecure HTTP earlier
than otherwise intended.

Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.

Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.

The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).

This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.

In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.

This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.

Under some circumstances, this weakness allows a user who has access to run the “ps” utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.

An integer overflow in the sqlite3KeyInfoFromExprList function in SQLite versions 3.39.2 through 3.41.1 allows an attacker with the ability to execute arbitrary SQL statements to cause a denial of service or disclose sensitive information from process memory via a crafted SELECT statement with a large number of expressions in the ORDER BY clause.

In ncurses, possibly a 6.x version, there is a NULL pointer dereference at the function _nc_name_match that will lead to a denial of service attack. NOTE: the original report stated version 6.1, but the issue did not reproduce for that version according to the maintainer or a reliable third-party

In SQLite 3.44.0 through 3.49.0 before 3.49.1, the concat_ws() SQL function can cause memory to be written beyond the end of a malloc-allocated buffer. If the separator argument is attacker-controlled and has a large string (e.g., 2MB or more), an integer overflow occurs in calculating the size of the result buffer, and thus malloc may not allocate enough memory.

Issue summary: Checking excessively long invalid RSA public keys may take
a long time.

Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.

When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.

An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.

The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.

The OpenSSL SSL/TLS implementation is not affected by this issue.

The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

There is an illegal address access in the fmt_entry function in progs/dump_entry.c in ncurses 6.0 that might lead to a remote denial of service attack.

Issue summary: Applications performing certificate name checks (e.g., TLS
clients checking server certificates) may attempt to read an invalid memory
address resulting in abnormal termination of the application process.

Impact summary: Abnormal termination of an application can a cause a denial of
service.

Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an `otherName` subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.

Note that basic certificate chain validation (signatures, dates, ...) is not
affected, the denial of service can occur only when the application also
specifies an expected DNS name, Email address or IP address.

TLS servers rarely solicit client certificates, and even when they do, they
generally don't perform a name check against a reference identifier (expected
identity), but rather extract the presented identity after checking the
certificate chain.  So TLS servers are generally not affected and the severity
of the issue is Moderate.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Allows modifying some file metadata (e.g. last modified) with filter="data" or file permissions (chmod) with filter="tar" of files outside the extraction directory.
You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile  extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter  for more information. Only Python versions 3.12 or later are affected by these vulnerabilities, earlier versions don't include the extraction filter feature.

Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected.

Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links.

In ncurses 6.0, there is a NULL Pointer Dereference in the _nc_parse_entry function of tinfo/parse_entry.c. It could lead to a remote denial of service attack if the terminfo library code is used to process untrusted terminfo data.

In GnuPG before 2.5.5, if a user chooses to import a certificate with certain crafted subkey data that lacks a valid backsig or that has incorrect usage flags, the user loses the ability to verify signatures made from certain other signing keys, aka a "verification DoS."

Allows the extraction filter to be ignored, allowing symlink targets to point outside the destination directory, and the modification of some file metadata.


You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile  extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter  for more information.

Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected.

Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links.

In ncurses 6.0, there is a stack-based buffer overflow in the fmt_entry function. A crafted input will lead to a remote arbitrary code execution attack.

Proxy-Authorization and Proxy-Authenticate headers persisted on cross-origin redirects potentially leaking sensitive information.

A vulnerability was found in Mercurial SCM 4.5.3/71.19.145.211. It has been declared as problematic. This vulnerability affects unknown code of the component Web Interface. The manipulation of the argument cmd leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A heap buffer overflow vulnerability was discovered in Perl. 

Release branches 5.34, 5.36, 5.38 and 5.40 are affected, including development versions from 5.33.1 through 5.41.10.

When there are non-ASCII bytes in the left-hand-side of the `tr` operator, `S_do_trans_invmap` can overflow the destination pointer `d`.

   $ perl -e '$_ = "\x{FF}" x 1000000; tr/\xFF/\x{100}/;' 
   Segmentation fault (core dumped)

It is believed that this vulnerability can enable Denial of Service and possibly Code Execution attacks on platforms that lack sufficient defenses.

There is an illegal address access in the _nc_save_str function in alloc_entry.c in ncurses 6.0. It will lead to a remote denial of service attack.

There is an illegal address access in the _nc_safe_strcat function in strings.c in ncurses 6.0 that will lead to a remote denial of service attack.

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.

Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.

In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates.  Any problematic use-cases would have to be using an "exotic"
curve encoding.

The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.

Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds.  Remote code execution
cannot easily be ruled out.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

The html.parser.HTMLParser class had worse-case quadratic complexity when processing certain crafted malformed inputs potentially leading to amplified denial-of-service.

OpenSSL 3.0.0 through 3.3.2 on the PowerPC architecture is vulnerable to a Minerva attack, exploitable by measuring the time of signing of random messages using the EVP_DigestSign API, and then using the private key to extract the K value (nonce) from the signatures. Next, based on the bit size of the extracted nonce, one can compare the signing time of full-sized nonces to signatures that used smaller nonces, via statistical tests. There is a side-channel in the P-364 curve that allows private key extraction (also, there is a dependency between the bit size of K and the size of the side channel). NOTE: This CVE is disputed because the OpenSSL security policy explicitly notes that any side channels which require same physical system to be detected are outside of the threat model for the software. The timing signal is so small that it is infeasible to be detected without having the attacking process running on the same physical system.

Stack-based buffer overflow in the _nc_write_entry function in tinfo/write_entry.c in ncurses 6.0 allows attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted terminfo file, as demonstrated by tic.

XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases.

**DISPUTED**A failure in the -fstack-protector feature in GCC-based toolchains 
that target AArch64 allows an attacker to exploit an existing buffer 
overflow in dynamically-sized local variables in your application 
without this being detected. This stack-protector failure only applies 
to C99-style dynamically-sized local variables or those created using 
alloca(). The stack-protector operates as intended for statically-sized 
local variables.

The default behavior when the stack-protector 
detects an overflow is to terminate your application, resulting in 
controlled loss of availability. An attacker who can exploit a buffer 
overflow without triggering the stack-protector might be able to change 
program flow control to cause an uncontrolled loss of availability or to
 go further and affect confidentiality or integrity. NOTE: The GCC project argues that this is a missed hardening bug and not a vulnerability by itself.

There is a LOW severity vulnerability affecting CPython, specifically the
'http.cookies' standard library module.


When parsing cookies that contained backslashes for quoted characters in
the cookie value, the parser would use an algorithm with quadratic
complexity, resulting in excess CPU resources being used while parsing the
value.

When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.

This flaw only manifests itself if the netrc file has an entry that matches
the redirect target hostname but the entry either omits just the password or
omits both login and password.

Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

Tool to check whether a PGP client is affected by CVE-2021-33560

There is an infinite loop in the next_char function in comp_scan.c in ncurses 6.0, related to libtic. A crafted input will lead to a remote denial of service attack.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in this way. This issue has been addressed in commit `b01b9b8` which is included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When Git asks for credentials via a terminal prompt (i.e. without using any credential helper), it prints out the host name for which the user is expected to provide a username and/or a password. At this stage, any URL-encoded parts have been decoded already, and are printed verbatim. This allows attackers to craft URLs that contain ANSI escape sequences that the terminal interpret to confuse users e.g. into providing passwords for trusted Git hosting sites when in fact they are then sent to untrusted sites that are under the attacker's control. This issue has been patch via commits `7725b81` and `c903985` which are included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

chroot in GNU coreutils, when used with --userspec, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer.

A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected.

A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack.

In SQLite 3.49.0 before 3.49.1, certain argument values to sqlite3_db_config (in the C-language API) can cause a denial of service (application crash). An sz*nBig multiplication is not cast to a 64-bit integer, and consequently some memory allocations may be incorrect.

The HTTP client drops sensitive headers after following a cross-domain redirect. For example, a request to a.com/ containing an Authorization header which is redirected to b.com/ will not send that header to b.com. In the event that the client received a subsequent same-domain redirect, however, the sensitive headers would be restored. For example, a chain of redirects from a.com/, to b.com/1, and finally to b.com/2 would incorrectly send the Authorization header to b.com/2.

os.OpenFile(path, os.O_CREATE|O_EXCL) behaved differently on Unix and Windows systems when the target path was a dangling symlink. On Unix systems, OpenFile with O_CREATE and O_EXCL flags never follows symlinks. On Windows, when the target path was a symlink to a nonexistent location, OpenFile would create a file in that location. OpenFile now always returns an error when the O_CREATE and O_EXCL flags are both set and the target path is a symlink.

ncurses 6.3 before patch 20220416 has an out-of-bounds read and segmentation violation in convert_strings in tinfo/read_entry.c in the terminfo library.

There is an illegal address access in the function _nc_read_entry_source() in progs/tic.c in ncurses 6.0 that might lead to a remote denial of service attack.

In ncurses 6.1, there is a NULL pointer dereference at function _nc_parse_entry in parse_entry.c that will lead to a denial of service attack. The product proceeds to the dereference code path even after a "dubious character `*' in name or alias field" detection.

Issue summary: The POLY1305 MAC (message authentication code) implementation
contains a bug that might corrupt the internal state of applications running
on PowerPC CPU based platforms if the CPU provides vector instructions.

Impact summary: If an attacker can influence whether the POLY1305 MAC
algorithm is used, the application state might be corrupted with various
application dependent consequences.

The POLY1305 MAC (message authentication code) implementation in OpenSSL for
PowerPC CPUs restores the contents of vector registers in a different order
than they are saved. Thus the contents of some of these vector registers
are corrupted when returning to the caller. The vulnerable code is used only
on newer PowerPC processors supporting the PowerISA 2.07 instructions.

The consequences of this kind of internal application state corruption can
be various - from no consequences, if the calling application does not
depend on the contents of non-volatile XMM registers at all, to the worst
consequences, where the attacker could get complete control of the application
process. However unless the compiler uses the vector registers for storing
pointers, the most likely consequence, if any, would be an incorrect result
of some application dependent calculations or a crash leading to a denial of
service.

The POLY1305 MAC algorithm is most frequently used as part of the
CHACHA20-POLY1305 AEAD (authenticated encryption with associated data)
algorithm. The most common usage of this AEAD cipher is with TLS protocol
versions 1.2 and 1.3. If this cipher is enabled on the server a malicious
client can influence whether this AEAD cipher is used. This implies that
TLS server applications using OpenSSL can be potentially impacted. However
we are currently not aware of any concrete application that would be affected
by this issue therefore we consider this a Low severity security issue.

Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny unintentionally disabledpolicy validation. This only affected certificate chains which contain policy graphs, which are rather uncommon.

In ncurses 6.0, there is an attempted 0xffffffffffffffff access in the append_acs function of tinfo/parse_entry.c. It could lead to a remote denial of service attack if the terminfo library code is used to process untrusted terminfo data.

There is an illegal address access in the function dump_uses() in progs/dump_entry.c in ncurses 6.0 that might lead to a remote denial of service attack.

Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.

Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.

RPKs are disabled by default in both TLS clients and TLS servers.  The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain.  The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.

Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected.  This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.

A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality.

There is an issue in CPython when using `bytes.decode("unicode_escape", error="ignore|replace")`. If you are not using the "unicode_escape" encoding or an error handler your usage is not affected. To work-around this issue you may stop using the error= handler and instead wrap the bytes.decode() call in a try-except catching the DecodeError.

NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().

Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the "KeyTrap" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.

In this repository you can find the files used to try to produce a POC for the CVE-2023-50387

In ncurses 6.0, there is a format string vulnerability in the fmt_entry function. A crafted input will lead to a remote arbitrary code execution attack.

Git GUI allows you to use the Git source control management tools via a GUI. When a user clones an untrusted repository and is tricked into editing a file located in a maliciously named directory in the repository, then Git GUI can create and overwrite files for which the user has write permission. This vulnerability is fixed in 2.43.7, 2.44.4, 2.45.4, 2.46.4, 2.47.3, 2.48.2, 2.49.1, and 2.50.1.

When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine.  If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate.

Issue summary: Checking excessively long DSA keys or parameters may be very
slow.

Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.

The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.

Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.

An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.

These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.

Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.

The OpenSSL SSL/TLS implementation is not affected by this issue.

The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

 TLP: Clear - Devguard GitLab CI/CD Components

🧩 DevGuard CI-Components

0.8.2

0.12.0 examples

attest

revert-c7057e5e

main

add-first-party-scan-to-gitlap-pipeline

add-jobs-tags

HEAD

update-risk-management-default-value

TLP: Clear - DevGuard GitHub Reusable Workflows

🧩 DevGuard Action

TLP: Clear - The documentation for the DevGuard Project

📚 DevGuard Documentation

TLP: Clear - The repository of the DevGuard Web Project

👩‍💻 DevGuard Web

TLP: Clear - The repository for the customized DevGuard Postgresql

🗄️ Devguard Postgresql

TLP: Clear - The main repository - contains the API, the devguard-scanner CLI and the Helm-Chart

💡 DevGuard

TLP: Clear - Manage your CVEs seamlessly, Integrate your Vulnerability Scanners, Documentation made easy, Compliance to security Frameworks - OWASP Incubating Project

🛡️ DevGuard
Group
/🧩 DevGuard CI-Components
Repository

Dependency Graph