Malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0. 
Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code. This results in a modified liblzma library that can be used by any software linked against this library, intercepting and modifying the data interaction with this library.

Git is distributed revision control system. `git log` can display commits in an arbitrary format using its `--format` specifiers. This functionality is also exposed to `git archive` via the `export-subst` gitattribute. When processing the padding operators, there is a integer overflow in `pretty.c::format_and_pad_commit()` where a `size_t` is stored improperly as an `int`, and then added as an offset to a `memcpy()`. This overflow can be triggered directly by a user running a command which invokes the commit formatting machinery (e.g., `git log --format=...`). It may also be triggered indirectly through git archive via the export-subst mechanism, which expands format specifiers inside of files within the repository during a git archive. This integer overflow can result in arbitrary heap writes, which may result in arbitrary code execution. The problem has been patched in the versions published on 2023-01-17, going back to v2.30.7. Users are advised to upgrade. Users who are unable to upgrade should disable `git archive` in untrusted repositories. If you expose git archive via `git daemon`, disable it by running `git config --global daemon.uploadArch false`.

Git is distributed revision control system. gitattributes are a mechanism to allow defining attributes for paths. These attributes can be defined by adding a `.gitattributes` file to the repository, which contains a set of file patterns and the attributes that should be set for paths matching this pattern. When parsing gitattributes, multiple integer overflows can occur when there is a huge number of path patterns, a huge number of attributes for a single pattern, or when the declared attribute names are huge. These overflows can be triggered via a crafted `.gitattributes` file that may be part of the commit history. Git silently splits lines longer than 2KB when parsing gitattributes from a file, but not when parsing them from the index. Consequentially, the failure mode depends on whether the file exists in the working tree, the index or both. This integer overflow can result in arbitrary heap reads and writes, which may result in remote code execution. The problem has been patched in the versions published on 2023-01-17, going back to v2.30.7. Users are advised to upgrade. There are no known workarounds for this issue.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in this way. This issue has been addressed in commit `b01b9b8` which is included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When Git asks for credentials via a terminal prompt (i.e. without using any credential helper), it prints out the host name for which the user is expected to provide a username and/or a password. At this stage, any URL-encoded parts have been decoded already, and are printed verbatim. This allows attackers to craft URLs that contain ANSI escape sequences that the terminal interpret to confuse users e.g. into providing passwords for trusted Git hosting sites when in fact they are then sent to untrusted sites that are under the attacker's control. This issue has been patch via commits `7725b81` and `c903985` which are included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.

Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.

The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).

This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.

In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.

This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.

Issue summary: Applications performing certificate name checks (e.g., TLS
clients checking server certificates) may attempt to read an invalid memory
address resulting in abnormal termination of the application process.

Impact summary: Abnormal termination of an application can a cause a denial of
service.

Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an `otherName` subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.

Note that basic certificate chain validation (signatures, dates, ...) is not
affected, the denial of service can occur only when the application also
specifies an expected DNS name, Email address or IP address.

TLS servers rarely solicit client certificates, and even when they do, they
generally don't perform a name check against a reference identifier (expected
identity), but rather extract the presented identity after checking the
certificate chain.  So TLS servers are generally not affected and the severity
of the issue is Moderate.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations

Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.

The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.

While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: The POLY1305 MAC (message authentication code) implementation
contains a bug that might corrupt the internal state of applications running
on PowerPC CPU based platforms if the CPU provides vector instructions.

Impact summary: If an attacker can influence whether the POLY1305 MAC
algorithm is used, the application state might be corrupted with various
application dependent consequences.

The POLY1305 MAC (message authentication code) implementation in OpenSSL for
PowerPC CPUs restores the contents of vector registers in a different order
than they are saved. Thus the contents of some of these vector registers
are corrupted when returning to the caller. The vulnerable code is used only
on newer PowerPC processors supporting the PowerISA 2.07 instructions.

The consequences of this kind of internal application state corruption can
be various - from no consequences, if the calling application does not
depend on the contents of non-volatile XMM registers at all, to the worst
consequences, where the attacker could get complete control of the application
process. However unless the compiler uses the vector registers for storing
pointers, the most likely consequence, if any, would be an incorrect result
of some application dependent calculations or a crash leading to a denial of
service.

The POLY1305 MAC algorithm is most frequently used as part of the
CHACHA20-POLY1305 AEAD (authenticated encryption with associated data)
algorithm. The most common usage of this AEAD cipher is with TLS protocol
versions 1.2 and 1.3. If this cipher is enabled on the server a malicious
client can influence whether this AEAD cipher is used. This implies that
TLS server applications using OpenSSL can be potentially impacted. However
we are currently not aware of any concrete application that would be affected
by this issue therefore we consider this a Low severity security issue.

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.

Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.

In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates.  Any problematic use-cases would have to be using an "exotic"
curve encoding.

The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.

Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds.  Remote code execution
cannot easily be ruled out.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: Checking excessively long DSA keys or parameters may be very
slow.

Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.

The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.

Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.

An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.

These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.

Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.

The OpenSSL SSL/TLS implementation is not affected by this issue.

The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

Issue summary: Checking excessively long invalid RSA public keys may take
a long time.

Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.

When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.

An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.

The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.

The OpenSSL SSL/TLS implementation is not affected by this issue.

The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL
to crash leading to a potential Denial of Service attack

Impact summary: Applications loading files in the PKCS12 format from untrusted
sources might terminate abruptly.

A file in PKCS12 format can contain certificates and keys and may come from an
untrusted source. The PKCS12 specification allows certain fields to be NULL, but
OpenSSL does not correctly check for this case. This can lead to a NULL pointer
dereference that results in OpenSSL crashing. If an application processes PKCS12
files from an untrusted source using the OpenSSL APIs then that application will
be vulnerable to this issue.

OpenSSL APIs that are vulnerable to this are: PKCS12_parse(),
PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()
and PKCS12_newpass().

We have also fixed a similar issue in SMIME_write_PKCS7(). However since this
function is related to writing data we do not consider it security significant.

The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.

Issue summary: A timing side-channel which could potentially allow recovering
the private key exists in the ECDSA signature computation.

Impact summary: A timing side-channel in ECDSA signature computations
could allow recovering the private key by an attacker. However, measuring
the timing would require either local access to the signing application or
a very fast network connection with low latency.

There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In particular
the NIST P-521 curve is affected. To be able to measure this leak, the attacker
process must either be located in the same physical computer or must
have a very fast network connection with low latency. For that reason
the severity of this vulnerability is Low.

Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions

Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service

This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.

This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.

The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.

Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.

Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.

RPKs are disabled by default in both TLS clients and TLS servers.  The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain.  The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.

Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected.  This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.

The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

A timing-based side-channel flaw was found in libgcrypt's RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.

CPAN.pm before 2.35 does not verify TLS certificates when downloading distributions over HTTPS.

A vulnerability was found in libcap. This issue occurs in the _libcap_strdup() function and can lead to an integer overflow if the input string is close to 4GiB.

A vulnerability was found in the pthread_create() function in libcap. This issue may allow a malicious actor to use cause __real_pthread_create() to return an error, which can exhaust the process memory.

Stack-based buffer overflow in the _nc_write_entry function in tinfo/write_entry.c in ncurses 6.0 allows attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted terminfo file, as demonstrated by tic.

In ncurses 6.0, there is a stack-based buffer overflow in the fmt_entry function. A crafted input will lead to a remote arbitrary code execution attack.

In ncurses 6.0, there is a format string vulnerability in the fmt_entry function. A crafted input will lead to a remote arbitrary code execution attack.

ncurses 6.3 before patch 20220416 has an out-of-bounds read and segmentation violation in convert_strings in tinfo/read_entry.c in the terminfo library.

There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.

There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.

Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.

NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().

In ncurses 6.0, there is an attempted 0xffffffffffffffff access in the append_acs function of tinfo/parse_entry.c. It could lead to a remote denial of service attack if the terminfo library code is used to process untrusted terminfo data.

In ncurses 6.0, there is a NULL Pointer Dereference in the _nc_parse_entry function of tinfo/parse_entry.c. It could lead to a remote denial of service attack if the terminfo library code is used to process untrusted terminfo data.

In ncurses, possibly a 6.x version, there is a NULL pointer dereference at the function _nc_name_match that will lead to a denial of service attack. NOTE: the original report stated version 6.1, but the issue did not reproduce for that version according to the maintainer or a reliable third-party

In ncurses 6.1, there is a NULL pointer dereference at function _nc_parse_entry in parse_entry.c that will lead to a denial of service attack. The product proceeds to the dereference code path even after a "dubious character `*' in name or alias field" detection.

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.

Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the "KeyTrap" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.

The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.

When curl is asked to use HSTS, the expiry time for a subdomain might
overwrite a parent domain's cache entry, making it end sooner or later than
otherwise intended.

This affects curl using applications that enable HSTS and use URLs with the
insecure `HTTP://` scheme and perform transfers with hosts like
`x.example.com` as well as `example.com` where the first host is a subdomain
of the second host.

(The HSTS cache either needs to have been populated manually or there needs to
have been previous HTTPS accesses done as the cache needs to have entries for
the domains involved to trigger this problem.)

When `x.example.com` responds with `Strict-Transport-Security:` headers, this
bug can make the subdomain's expiry timeout *bleed over* and get set for the
parent domain `example.com` in curl's HSTS cache.

The result of a triggered bug is that HTTP accesses to `example.com` get
converted to HTTPS for a different period of time than what was asked for by
the origin server. If `example.com` for example stops supporting HTTPS at its
expiry time, curl might then fail to access `http://example.com` until the
(wrongly set) timeout expires. This bug can also expire the parent's entry
*earlier*, thus making curl inadvertently switch back to insecure HTTP earlier
than otherwise intended.

When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine.  If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate.

When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.

This flaw only manifests itself if the netrc file has an entry that matches
the redirect target hostname but the entry either omits just the password or
omits both login and password.

When asked to use a `.netrc` file for credentials **and** to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.

This flaw only manifests itself if the netrc file has a `default` entry that
omits both login and password. A rare circumstance.

script command in the util-linux package before 2.11n allows local users to overwrite arbitrary files by setting a hardlink from the typescript log file to any file on the system, then having root execute the script command.

umount in util-linux 2.8 to 2.12q, 2.13-pre1, and 2.13-pre2, and other packages such as loop-aes-utils, allows local users with unmount permissions to gain privileges via the -r (remount) option, which causes the file system to be remounted with just the read-only flag, which effectively clears the nosuid, nodev, and other flags.

Lax permissions set by the Apache Portable Runtime library on Unix platforms would allow local users read access to named shared memory segments, potentially revealing sensitive application data. 

This issue does not affect non-Unix platforms, or builds with APR_USE_SHMEM_SHMGET=1 (apr.h)

Users are recommended to upgrade to APR version 1.7.5, which fixes this issue.

The email module of Python through 3.11.3 incorrectly parses e-mail addresses that contain a special character. The wrong portion of an RFC2822 header is identified as the value of the addr-spec. In some applications, an attacker can bypass a protection mechanism in which application access is granted only after verifying receipt of e-mail to a specific domain (e.g., only @company.example.com addresses may be used for signup). This occurs in email/_parseaddr.py in recent versions of Python.

There is a MEDIUM severity vulnerability affecting CPython.

The 
email module didn’t properly quote newlines for email headers when 
serializing an email message allowing for header injection when an email
 is serialized.

There is a LOW severity vulnerability affecting CPython, specifically the
'http.cookies' standard library module.


When parsing cookies that contained backslashes for quoted characters in
the cookie value, the parser would use an algorithm with quadratic
complexity, resulting in excess CPU resources being used while parsing the
value.

There is a MEDIUM severity vulnerability affecting CPython.





Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives.

The urllib.parse.urlsplit() and urlparse() functions improperly validated bracketed hosts (`[]`), allowing hosts that weren't IPv6 or IPvFuture. This behavior was not conformant to RFC 3986 and potentially enabled SSRF if a URL is processed by more than one URL parser.

A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected.

The Python standard library functions `urllib.parse.urlsplit` and `urlparse` accepted domain names that included square brackets which isn't valid according to RFC 3986. Square brackets are only meant to be used as delimiters for specifying IPv6 and IPvFuture hosts in URLs. This could result in differential parsing across the Python URL parser and other specification-compliant URL parsers.

A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.

A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.

A flaw was found in the GNU coreutils "split" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.

chroot in GNU coreutils, when used with --userspec, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer.

In pkgconf through 1.9.3, variable duplication can cause unbounded string expansion due to incorrect checks in libpkgconf/tuple.c:pkgconf_tuple_parse. For example, a .pc file containing a few hundred bytes can expand to one billion bytes.

Under some circumstances, this weakness allows a user who has access to run the “ps” utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.

devguard-action

main

Devguard-Pipeline

quay.io/jetstack/cert-manager-acmesolver

Devguard Postgresql

ghcr.io/l3montree-dev/devguard-operator

devguard-web

ghcr.io/l3montree-dev/devguard-postgresql

ghcr.io/l3montree-dev/devguard

docker.io/oryd/kratos

devguard-scanner

devguard

 Devguard-Pipeline

DevGuard Operator

devguard-documentation

Devguard

Robot User

OpenCoDE

Sebastian Kawelke

Tim Bastin

Refaei Shikho

refoo0

L3montree Cybersecurity

Controlled by an Kubernetes Operator. Asset quay.io/jetstack/cert-manager-acmesolver

Controlled by an Kubernetes Operator. Asset ghcr.io/l3montree-dev/devguard-operator

Controlled by an Kubernetes Operator. Asset ghcr.io/l3montree-dev/devguard-postgresql

Controlled by an Kubernetes Operator. Asset docker.io/oryd/kratos

The scanner component of the devguard project

This is a scan for Devguard CI/CD components in a GitLab project, aimed at testing whether these components function correctly.

The documentation for the DevGuard Project

Manage your CVEs seamlessly, Integrate your Vulnerability Scanners, Documentation made easy, Compliance to security Frameworks - OWASP Incubating Project

Package	Max Risk	Total Risk	Flaw Count	Installed Version	Action
debian/xz-utils	7.6	7.6	1	5.4.1	No fix available
debian/git	4.7	9.3	4	2.39.5-0	Update to version to reduce total risk by 0.0
debian/openssl	4.4	21.8	11	3.0.14	Update to version to reduce total risk by 0.0
debian/libgcrypt20	4.4	8.0	2	1.10.1	No fix available
debian/perl	3.7	3.7	1	5.36.0-7	No fix available
debian/libcap2	3.7	4.9	2	2.66-4	No fix available
debian/ncurses	3.6	40.5	25	6.4	No fix available
debian/systemd	3.5	6.4	3	252.30	No fix available
debian/curl	3.5	8.9	4	7.88.1-10	Update to version to reduce total risk by 1.9
debian/util-linux	3.4	6.3	2	2.38.1-5	Update to version 2.12p-8 to reduce total risk by 6.3
debian/apr	3.4	3.4	1	1.7.2	No fix available
debian/python3.11	2.8	12.8	7	3.11.2-6	No fix available
debian/sqlite3	2.8	4.1	2	3.40.1	No fix available
debian/coreutils	1.8	3.0	2	9.1	No fix available
debian/pkgconf	1.7	1.7	1	1.8.1	No fix available
debian/procps	0.8	0.8	1	4.0.2-3	No fix available

L3montree Cybersecurity
Organization
/Devguard
Project
/devguard-action
Asset

Identified Risks